Robert Adamia

Robert Adamia was born on April 6, 1933 in Tbilisi. In 1951 he graduated from secondary school with gold medal. In 1956 graduated from metallutgical faculty of Georgian Politechnical Institute with distinquished diploma and was granted with degree of Ingineer-metallurgist speciality "pessure shaping of mettals".
In 1956-58 worked in Kommunarsk and later in Rustavy metallurgical plant. In 1958-61 was post-graduate student of Georgian Scientific Academy's metallurgical Institute and prepered his candidate thesis in Moscow's Mechanical Enginearing Institute, where he defended in 1963 his thesis conserning problem of perfection dynamic caracteristics of tube rolling miles.
In 1964-71 worked in Georgian scientific academy's metallurgical Institute as senior scientific worker.
In 1970 R. Adamia was granted with Doctor's degree.
In 1971-83 he worked as the head of department of "pressure shaping of metalls" which was founded by him in Georgian Politechnical Institute".
In 1983 he was assigned on the post of Head of Kutaisi's combined scientific centre of Georgian Academy of Sciences on the base of this centre in 1990 was faunded independent Institute in Kutaisi. Simultaneously was appointed in the capacity of director.
In 1992 R. Adamia was elected as a member of Georgian Engineering Academy and in 1993 as a member of Georgian Academy of Science.
In 1994 R. Adamia was granted with the prize of G. Nicoladze of disee's aerodynamic processes".
Prof. Adamia is author of more than 150 works. Among them 6 monography and 16 inventions. numberof works are published in USA, Germany, Spane, Romania ets. Ander Adamia's guidance and consultation 8 doctor's and 17 candidate's thesisis have been prepared and defended.
Scientific activity of R. Adamia is many-sided (versatile). His scientific innterests spreads to metallurgical equipment, machine-tools, automobiles, internal combustion engines, robor-manipulators and wide range of actual problems of analysis and sinthesis dynamic loads of other mechanical systems with many degree of freedom.
R. Adamia is acknowledged by lot of leading scientists all over the world as founder of new scientific direction in metallurgical equipment's dynamic processe's optimization sinthesid and therefore computing of rational constructiv parameters of these equipments.

List of main scientific works of academician, professor Robert Adamia

• Optimization of rolling mill's dynamic loadings, "Metallurgy Moscow, 1979
• Principles of rational projection of metallurgical machines, "Metallurgy", Moscow, 1984
• Limitation of machine's dynamic loadings, Publish "Metsniereba", Tbilisi,1989
• Glass-armoured thermoplastics (Dynamic calculations and application) publ. "Metsniereba", Tbilisi, 1990
• Principles of rational projection of Diesele engine's gas-air path, "Metsniereba", Tbilisi, 1993
• Dynamics of motoblocks and small-sized tractors
• Investigation of tube cold rolling miel's feeding-rotation mechanizmes working process, works of "VPJJMET MASH", v. N7, Moscow,1963
• Determination of feeding effort in thin tube rolling process, works of "VPJJMET MASH", v. N 13, Moscow, 1964
• Investigation of cam mechaizes by the electron-simulation method, "Problems of metall's mechanical treatment", edition V, Moscow, 1964
• Investigation of power-force parameters of round billet rolling mill "900" "Steel", N12,1967 Moscow
• On precision of evaluation of maximum dynamic loadings in machine's elastic units, " Heavy machine's dynamics and strength",ed 3, Dnepropetrovsk, 1978
• On the problems of analysis of rolling mill's self-exited oscillations regimes. Georgian Academy's Metallurgical Institute's works N4, 1979, Tbilisi
• On the Analysis and synthesis of vibrations in mechanical systems, acounting nonlinearity of units elastic characteristics 0and forces of nonlinear friction, Works of Georgian politech. institute, N6 (216) Tbilisi, 1979
• Optimization of transition processes in the maine lines of continuous wide-strip rolling mills; "Durability of metellurgical eguipment", Moscow, 1981
• Optimization of Damping in linear vibratory systems applies to the Dynamics of a Rolling mill; Works of "JFTOMM", "machaizms", V5 New York, 1970
• About gradient method's utilization for the dynamic system's synthesis with the best damping; Bulleten of Politechnic institute V.XV (XIX), JASJ, Romania, 1969
• Analysis of stressed state in the highspeed sheet rolling mill's transmitions; Industry, Ahen, Germany, 1970
• Machine agredate's dynamic loadings optimization synthesis; Materials of VII World congress in "mechainsms and machine theory", Sevilia, Spain, 1987
• About investigation of rolling regime by the normal shape's method; Informations of Georgian Academy of Sciences, V.125, 1987, Tbilisi
• Dynamic loading optimization in the autokrane's "KA3 4540" transmisions; Informations of Georgian academy of Sciences, V. 125, 1987, Tbilisi
• Optimization of constructiv paramerers of automobiles back axle dynamic system
• Determination of impact reaction in the plug mill roll's support (bearings) Informations of G. Academy of sciences, 126, N2, 1987
• On the construction of approximate solution in the class of matematical model, oscillation's dampers of aerial tramway vans; Informations of G. Academy of Sciences, 131, N2, 1988
• Optimization synthesis of transitional processes of the excavation machine's drives; Informations of G. Academy of Sciences, 132, N1,1988
• Optimization synthesis of constructiv parameters of robot-manipulators; Informations of G. Academy 132, N3, 1988

|Structure| |Presidium| |Institutes| |Members| |Publications| |Events at GAS| |Search the Site| |Collection of Links|